Configure build and start for SvelteKit · Ample Computer

Configure build and start for SvelteKit

Configure build and start for a SvelteKit app on Ample. Use @sveltejs/adapter-node and start the build with node build; it reads PORT and HOST. Ample detects the runtime, installs dependencies, runs the build when present and starts the app on the node-22 template behind a public HTTPS URL.

What it runs on

You need

Exact tested configuration

build

npm run build --if-present

install

npm install

runtime

node

sizes 1vcpu-1gb start

npm run start

template node-22

Steps

  1. Make the start command bind correctly. Use @sveltejs/adapter-node and start the build with node build; it reads PORT and HOST.

  2. Deploy. Run the existing synchronous deploy once from the project directory and read the result. Exit 0 is live, 1 is failed, 2 needs an answer first (a preflight question). Re-running with no change is a content-addressed no-op.

$ ample deploy . --name <app-name> --public --format json
  1. Verify. Fetch the live URL and run the success checks below. On failure read the build log, then the runtime log, fix the cause and deploy again; do not blind-retry.
$ ample logs <deployment_id> --kind build

How it was checked

✓ page or root route responds · http get/ → "ample canary sveltekit node adapter"

Evidence

  1. November 5, 2026 · canary run
    SvelteKit app with adapter-node deployed on node-22 and rendered the expected page.

Tested examples

What it doesn’t cover